What is the purpose of the DHCP service or server?

A DHCP Server is a network server that automatically provides and assigns IP addresses, default gateways and other network parameters to client devices. It relies on the standard protocol known as Dynamic Host Configuration Protocol or DHCP to respond to broadcast queries by clients.

1. What is the purpose of DHCP client service?
2. What is the purpose of DHCP server Mcq?
3. What are two functions of DHCP?
4. What is the best reason to have a DHCP server?
5. Should I enable DHCP server?
6. Should I use router as DHCP server?
7. What service is DHCP an extension of?
8. What is the difference between DHCP service in the server and the wireless router?
9. What is the main purpose of DNS server?
10. Where is the DHCP server located?
11. What are DHCP options?
12. What's the difference between DNS and DHCP?
13. Does DHCP use DNS?

What is the purpose of DHCP client service?

You can use the DHCP client service to obtain IP addresses and other TCP/IP configuration information from a DHCP server (such as a Windows 2000 or Windows NT server running the DHCP Server service).

What is the purpose of DHCP server Mcq?

Explanation: We use DHCP to allow the hosts to acquire their ip addresses dynamically which is better than visiting each and every host on the network and configure all of this information manually. Explanation: DHCP is used for both IPv4 and IPv6 addressing.

What are two functions of DHCP?

The server has two basic functions: Managing IP addresses – The DHCP server controls a range of IP addresses and allocates them to clients, either permanently or for a defined period of time. The server uses a lease mechanism to determine how long a client can use a nonpermanent address.

What is the best reason to have a DHCP server?

One of the main benefits of using a DHCP server compared to other networking solutions is that it's a lot faster to set up a TCP/IP network. Additionally, it's much easier to manage such a network because there's no heavy lifting - the server automatically assigns IP addresses so IT staff don't have to.

Should I enable DHCP server?

IMPORTANT: The IP Address has to be within the DHCP Reservation range. This is because you cannot set an IP reservation outside the DHCP range. QUICK TIP: The DHCP Server should be enabled because disabling it will make your router work as a switch, allowing only one (1) computer to have Internet access.

Should I use router as DHCP server?

All depends on your topology really, if you're talking multiple VLANS spanning multiple sites and 1000's of users then I would recommend server DHCP as this would cause unnecessary overhead on your routers and if the router ever goes down then clients will not be able to be assigned IP addresses locally.

What service is DHCP an extension of?

DHCP is an extension of a 1985 network IP management protocol, Bootstrap Protocol (BOOTP). DHCP is more advanced, and DHCP servers can handle BOOTP client requests if any BOOTP clients exist on a network segment.

What is the difference between DHCP service in the server and the wireless router?

When the router turns on, it automatically starts the DHCP server. From that point DHCP leases local IP addresses to each connected device. ... By the way, there is no difference between working of DHCP on a wired/wireless router. The protocol is independent of the link layer.

What is the main purpose of DNS server?

The purpose of DNS is to translate a domain name into the appropriate IP address. This is done by looking up the dns records of the requested domain. There are typically eight steps in this DNS lookup process that follow the information path from the originating web browser to the DNS server and back again.

Where is the DHCP server located?

DHCP Server Location

On home networks the DHCP server is on the home router or home hub. Most home routers will have the DHCP server enabled by default (turned on).

What are DHCP options?

DHCP Options are additional IP address settings that a DHCP server passes to DHCP clients. When a DHCP client requests an IP address from a DHCP server, the server sends the client at least an IP address and a subnet mask value. Additional information can be sent to clients if you configure various DHCP options.

What's the difference between DNS and DHCP?

DNS, Domain Name System Server is used to translate domain names to IP Addresses or used to translate IP Addresses to domain names. DHCP, Dynamic Host Configuration Protocol Server is used to configure hosts mechanically. Only UDP protocol supported. ...

Does DHCP use DNS?

The DHCP service can use DNS in two ways: The DHCP server can look up the host name that is mapped to an IP address that the server is assigning to the client. ... The DHCP server can attempt to make a DNS mapping on a client's behalf, if the DHCP server is configured to update DNS.