Animalscaretips
1. The eaves. The eaves are the edges of the roof which overhang a vertical external wall and, normally, they jut out over the side of a building creating an overhang, so rainwater stays clear of the walls. Check out for rot or damp on eaves as if this happens, water can get into the loft space or damage external walls ...
- What is the trim around the roof called?
- What is roof overhang?
- What are the sides of a roof called?
- What is the difference between fascia and trim?
- What is a roof rake edge?
- What are building overhangs called?
- What is a roof fascia?
- What is the board behind the fascia called?
- Is fascia trim necessary?
- What is the difference between fascia and soffits?
- What is a gable edge?
- What is drip edge?
- What is the difference between rake edge and drip edge?
- What is the architectural term for an overhang?
- Do roofs need overhangs?
- What is the front overhang on a house called?
What is the trim around the roof called?
Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards. ...
What is roof overhang?
In architecture, an overhang is a protruding structure that may provide protection for lower levels. ... An overhanging eave is the edge of a roof, protruding outwards, beyond the side of the building generally to provide weather protection.
What are the sides of a roof called?
Eaves: The eaves are the lower edges of the roof that overhang the home's exterior walls. The diagram above also has an eave on the opposite side of the home in the same place. Gable: The A-shaped side wall of the home that forms the peak of the roof is called the Gable.
What is the difference between fascia and trim?
Trim is the material used to encase windows and doors, among other features, on a home's exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.
What is a roof rake edge?
Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.
What are building overhangs called?
The eaves are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building. The eaves form an overhang to throw water clear of the walls and may be highly decorated as part of an architectural style, such as the Chinese dougong bracket systems.
What is a roof fascia?
What is Roofing Fascia? Roofing fascia forms the vertical finishing edge that connects your roofing to rafters, trusses, or gutter attachments. You see it beneath the roof's overhang. Fascia is typically made of a wooden board or non-corrosive sheet metal.
What is the board behind the fascia called?
Soffit is the layer of wood, vinyl or aluminum that extends from the bottom of the fascia to the top piece of your wall board. Together, they protect the rafters from weather, moisture, and allow air to flow through soffits and vents.
Is fascia trim necessary?
Fascia trim is a necessary and expected trim for your home. ... Protects from moisture: Fascia trim is designed to block out any moisture from under your roof which not only helps keep your attic dry but also helps with the humidity level throughout the year.
What is the difference between fascia and soffits?
Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.
What is a gable edge?
A gable is the generally triangular portion of a wall between the edges of intersecting roof pitches. The shape of the gable and how it is detailed depends on the structural system used, which reflects climate, material availability, and aesthetic concerns.
What is drip edge?
Drip edge is metal flashing installed at the edges of the roof to keep water away from your fascia and from getting underneath your roofing components. If your roof doesn't have drip edge, water gets behind your gutters and rots out both your fascia board and roof decking.
What is the difference between rake edge and drip edge?
It involves the point of application in relation to the underlayment and/or eaves flashing. At the rake edge, the perimeter drip edge metal is applied over the underlayment with the appropriate fasteners secured every eight (8) to ten (10) inches on center.
What is the architectural term for an overhang?
Eaves: The projecting overhang at the lower edge of a roof. Entablature: The horizontal band of elements above the column capitals in classical architecture. Façade: The exterior faces of a building, often used to refer to the wall in which the building entry is located.
Do roofs need overhangs?
A roof overhang is an essential part of your roofing system to protect your house. If you are simply adding function and protection, or if you want to incorporate a new style to update the exterior of your home, a new roof overhang is a good idea.
What is the front overhang on a house called?
What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.
