What is the name of overhanging edge of a roof called?

Eaves—The lower edge of a roof (often overhanging beyond the edge of the house). Fascia—A decorative board extending down from the roof edge either at the eave or at the rake.

1. What are roof overhanging edges called?
2. What is the trim around the roof called?
3. What is a roof rake edge?
4. What are the sides of a roof called?
5. What is the difference between fascia and trim?
6. What part of the roof is the fascia?
7. What is the difference between fascia and flashing?
8. What is a gable edge?
9. What is the difference between rake edge and drip edge?
10. What is drip edge?
11. What is the board behind the fascia called?
12. What is the difference between a fascia board and a soffit?
13. What is trim on the outside of a house?
14. What are eaves soffits and fascias?
15. What is the difference between eaves and soffits?
16. What is under the soffit?

What are roof overhanging edges called?

1. The eaves. The eaves are the edges of the roof which overhang a vertical external wall and, normally, they jut out over the side of a building creating an overhang, so rainwater stays clear of the walls. Check out for rot or damp on eaves as if this happens, water can get into the loft space or damage external walls ...

What is the trim around the roof called?

Fascia: Vertical roof trim located along the perimeter of a building, usually below the roof level, to cover the rafter tails at the eaves and to seal off the top of the siding along the rake; also called gutter boards. ...

What is a roof rake edge?

Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.

What are the sides of a roof called?

Eaves: The eaves are the lower edges of the roof that overhang the home's exterior walls. The diagram above also has an eave on the opposite side of the home in the same place. Gable: The A-shaped side wall of the home that forms the peak of the roof is called the Gable.

What is the difference between fascia and trim?

Trim is the material used to encase windows and doors, among other features, on a home's exterior. Fascia is a horizontal or angled board that encloses the edge or face of the projecting eaves.

What part of the roof is the fascia?

The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished. Your gutter sits atop the facia board. The fascia is also known as a “transition trim” between the home and the roofline. The fascia supports the shingles and helps to keep moisture out.

What is the difference between fascia and flashing?

Fascia is the decorative finish to the edge of your roof. ... On most homes you will find the gutter attached to the fascia. Flashing. Keeping up with the theme of weatherization, flashing is the epitome of it.

What is a gable edge?

A gable is the generally triangular portion of a wall between the edges of intersecting roof pitches. The shape of the gable and how it is detailed depends on the structural system used, which reflects climate, material availability, and aesthetic concerns.

What is the difference between rake edge and drip edge?

It involves the point of application in relation to the underlayment and/or eaves flashing. At the rake edge, the perimeter drip edge metal is applied over the underlayment with the appropriate fasteners secured every eight (8) to ten (10) inches on center.

What is drip edge?

Drip edge is metal flashing installed at the edges of the roof to keep water away from your fascia and from getting underneath your roofing components. If your roof doesn't have drip edge, water gets behind your gutters and rots out both your fascia board and roof decking.

What is the board behind the fascia called?

Soffit is the layer of wood, vinyl or aluminum that extends from the bottom of the fascia to the top piece of your wall board. Together, they protect the rafters from weather, moisture, and allow air to flow through soffits and vents.

What is the difference between a fascia board and a soffit?

Fascia is installed around the entire structure and is attached to the uncovered ends of rafters or to the top of exterior walls. Soffit is designed to be installed from the exterior wall to the fascia board. ... Sometimes the roof is flush with the edge of the exterior walls.

What is trim on the outside of a house?

Trim on a home's exterior typically includes the material that edges the windows and doors, the fascia board that runs along the lower edge of the roof and the soffits beneath the roof. ... Traditionally, whether a home has brick, stucco or stone siding, the trim material is wood.

What are eaves soffits and fascias?

Eaves are the edges of the roof that overhang your building. Soffits are the underneath portion of the eaves that face the ground. ... Fascias are the narrow, vertical pieces that connect the eaves and the soffits.

What is the difference between eaves and soffits?

In the widest sense of the term, soffits can refer to the underside of almost anything that's constructed, including arches and porches. Another way to explain it is to say soffit is the exposed siding underneath your roof's overhang. ... To summarise, an eave is part of a roof system and a soffit is part of the eave.

What is under the soffit?

Soffit. The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board.