Animalscaretips
What Is a Soffit? Your roof by necessity, will often times extend over the walls of your home. This overhang can go by a few names, such as the house eaves or the rafters of your roof. The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”.
- What do we call a roof overhang?
- What is the architectural term for an overhang?
- What is a roof soffit?
- What is it called where a roof meets a wall?
- What is the overhang of a house?
- What is a garage overhang called?
- What does Palladian style mean?
- What is the structural part of a roof?
- What are eaves and soffits?
- What's the difference between eaves and soffits?
- What is a roof valley?
What do we call a roof overhang?
Eaves are the underside of your roof – specifically the part of the roof that attaches to and juts out from the house. ... The overhang created by your eaves will direct water away from the walls and windows during the rain which means less cleaning and greater longevity in your build.
What is the architectural term for an overhang?
Eaves: The projecting overhang at the lower edge of a roof. Entablature: The horizontal band of elements above the column capitals in classical architecture. Façade: The exterior faces of a building, often used to refer to the wall in which the building entry is located.
What is a roof soffit?
The soffit is part of the overhang where your roof meets your siding. When rain or snow hits your roof, it runs down, and the overhang allows the water to flow away from your house. The soffit is underneath the overhang, between the roof's edge and side of your home—the bottom of the triangle, if you will.
What is it called where a roof meets a wall?
A headwall is a level junction where a roof meets a wall.
What is the overhang of a house?
An overhanging eave is the edge of a roof, protruding outwards, beyond the side of the building generally to provide weather protection.
What is a garage overhang called?
Give your Garage Doors Style and Curb Appeal with a Garage Arbor Overhang. ... A recent trend with homeowners is adding a garage arbor or portico.
What does Palladian style mean?
Palladian architecture is a European architectural style derived from and inspired by the designs of the Venetian architect Andrea Palladio (1508–1580). ... Palladio's work was strongly based on the symmetry, perspective, and values of the formal classical temple architecture of the Ancient Greeks and Romans.
What is the structural part of a roof?
First is the frame of the roof structure. The truss is the “skeleton” of a roof, made of a series of parallel beams. The rafters are the supporting beams that run from the apex to the bottom of a roof, holding up the truss. Eaves are the edges of a roof, typically overhanging the vertical exterior walls of a building.
What are eaves and soffits?
Eaves and soffits are often composed of different materials. Eaves are usually made of wood and then covered with roofing material. Soffit materials coordinate with siding and fascia boards on the exterior walls, and generally follow the aesthetics of the residence.
What's the difference between eaves and soffits?
In the widest sense of the term, soffits can refer to the underside of almost anything that's constructed, including arches and porches. Another way to explain it is to say soffit is the exposed siding underneath your roof's overhang. ... To summarise, an eave is part of a roof system and a soffit is part of the eave.
What is a roof valley?
A roof valley is formed where two roof slopes meet. Water collects in a valley to flow off the roof. Your choice of valley installation method is critical because, when improperly installed, valleys are risks for serious leaks. Essentially, there are three main ways to shingle a roof valley: woven, closed-cut and open.
