How much space does a toilet need?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

1. How much space do you need between toilet and vanity?
2. Is 2 feet enough room for a toilet?
3. How much leg room do you need for a toilet?
4. How small can a toilet room be?
5. How much space do you need around a toilet UK?
6. What is a close coupled toilet?
7. Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?
8. What is a room with just a toilet called?
9. Is 60cm wide enough for a toilet?
10. What is the smallest en suite you can have?
11. How do I choose a close coupled toilet?
12. Are back to wall toilets a good idea?
13. How far from the wall should a toilet rough in Be?
14. Which is better Kohler or American Standard toilets?
15. What's the difference between a 10 inch and 12-inch rough in toilet?

How much space do you need between toilet and vanity?

A toilet should have some elbow room between it and another fixture or vanity. The NKBA's recommendation is at least 18″. Codes allow a minimum distance of 15″. If you're placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.

Is 2 feet enough room for a toilet?

Code minimums tend to be 21 inches. But as this allows less than two feet in front of the toilet, the NKBA recommends adding even more space: up to 30 inches, minimum.

How much leg room do you need for a toilet?

The International Residential Code (IRC) requires that a room housing only a toilet needs to have, at minimum, 30-inch by 60-inch dimensions. This ensures at least 15 inches from the center of the toilet to each sidewall and that a minimum of 30 inches of legroom in front of this fixture.

How small can a toilet room be?

The minimum size for a downstairs toilet is 70cm wide x 130cm long. However, to make it a functional and comfortable space, you ideally want to be working with a footprint of 80cm x 140cm; in either instance the door would typically have to open outward.

How much space do you need around a toilet UK?

The toilet and bidets must have a minimum space of 70cm in width and 120cm in length. If they are next to a wall, the minimum free space should be 20cm, and if there is an element on their side, they should not be placed less than 15cm away for greater usability.

What is a close coupled toilet?

What is a close-coupled toilet? It's simply a conventional toilet where the ceramic cistern sits directly upon the toilet pan itself. ... Close coupled toilets are an ideal standard toilet that you can have in your home. With them being the standard toilet to have in most homes in the UK.

Can you replace a 10 inch rough in toilet with a 12 inch rough in toilet?

The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.

What is a room with just a toilet called?

To builders nowadays, a water closet refers to a room with just a toilet, although some companies, such as Richmond American Homes, will include water closets in the same category as a powder room or a half bath—a room with a toilet plus a sink.

Is 60cm wide enough for a toilet?

Whatever sink you choose, you should allow at least 60cm between the front of the sink and the wall or any other fitting opposite for passage. A toilet hung from the wall, and with a concealed cistern, brings a sense of space to any bathroom.

What is the smallest en suite you can have?

What is the smallest space you can fit an en-suite? This is a question we receive a lot. The answer varies, but generally the minimum space that you'll need for an en-suite that is fitted with a basin, toilet and shower is approximately 0.8m by 1.8m.

How do I choose a close coupled toilet?

Key points to remember when choosing a close coupled toilet

Opt for a smaller, compact design in a small bathroom to help your bathroom look spacious. If you don't want to see any pipes whatsoever, then a close coupled toilet isn't for you. Opt for a back to wall toilet with a wc unit to neatly conceal every pipe.

Are back to wall toilets a good idea?

A back to wall or wall hung toilet may be more pleasing to the eye, it may even save space in your bathroom, but they are often the more expensive option. ... In terms of water efficiency, wall hung toilets can offer reduced water storage or dual flush features, meaning that you only use the water needed.

How far from the wall should a toilet rough in Be?

In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.

Which is better Kohler or American Standard toilets?

Even though American Standard offers a wider design selection, most of its toilets need more installation space. Kohler toilets, meanwhile, are better-suited for compact and small bathroom areas. As such, Kohler is a great choice if you want an elegant overall look and have a limited bathroom space.

What's the difference between a 10 inch and 12-inch rough in toilet?

When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. ... However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.