How do you take a fan off of an international tractor?

1. What does the fan do on a tractor?
2. What temperature does a fan clutch engage?
3. Do tractors have radiators?
4. Can I run my tractor without a thermostat?
5. Which tractor otherwise is called as walking type tractor?
6. What is a fan clutch wrench?

What does the fan do on a tractor?

The role of a tractor fan and air conditioners is not only to lower air temperature in the cabin, but to provide a more comfortable environment when working in hot conditions. Without an air-conditioned tractor cab, ventilation using a tractor fan is the most effective method of providing cooling for the operator.

What temperature does a fan clutch engage?

At what temperatures do fan clutches engage? Answer: Most fan clutches engage at about 170°F air temperature (about 180-190°F engine temperature). They reduce the temperature about 20°F before disengaging.

Do tractors have radiators?

Radiators are usually located in front of the tractor to get the most out of the air flow to help keep the coolant temperatures down. Modern tractors use a water pump to push water and coolant through the engine. ... Most modern tractors use either full coolant or a mixture of coolant and water.

Can I run my tractor without a thermostat?

You can run without a thermostat, if you restrict the flow of coolant. The closer the engine temp runs to 210, the more power it will produce, with less fuel consumption. The engine will also create less internal wear at this temperature.

Which tractor otherwise is called as walking type tractor?

(iii) Walking tractor (Power tiller): Power tiller is a walking type tractor. This tractor is usually fitted with two wheels only. The direction of travel and its controls for field operation is performed by the operator, walking behind the tractor.

What is a fan clutch wrench?

A fan clutch pulley tool comes in handy whenever you want to remove the cooling fan and clutch from the front of an engine. This tool is designed to go around the nuts that hold the pulley to the water pump, holding it still while another wrench removes the fan clutch itself.